•     HOME    
• COMPANY    
• PRODUCTS & SERVICES »     
  • X-Ray Devices »
    • MEKI
    • XIS-500
    • XIS-1300
    • XIS-2300
    • XIS-3000
    • XIS-3500
    • XIS-4000
    • XIS-5000
  • Rejecters »
    • Flipper
    • Air Blowing
    • Shute
    • Heavy Duty
    • Push Arm
  • Maintenance
• BENEFITS    
• CONTACT

Push Arm Rejecter

The rejecter works as a natural and functional continuation of the Inspection System. The defective products are removed from the conveyor line and the reason for rejection is stored within the Inspection System.

• The rejecter may be placed immediately after or in any convenient location after the X-ray inspection system
• Detection of a non-acceptable product will trigger the product rejection function
• The rejecter operation is controlled by the X-ray system from where it receives a 0-24V signal
• The operation is programmable from the system user interface:
  • an ON / OFF function
  • the reject delay is set in ms (distance between inspection and rejecter depending on line speed)
  • the rejecting time is set in ms (depending upon product size and line speed)

Cylinder pushing type

• The rejecter is attached directly to the Inspection System
• A separate conveyor belt and an adjustable push arm (pushing speed and delay)
• Conveyor length: 250mm
• Belt width: 160mm
• Cylinder stroke: over 130mm